What is the difference between ATF and ATF 4?
ATF +4 is a synthetic fluid for finely-tuned transmissions, so if you use a non-synthetic ATF instead of ATF +4 in a car or truck that calls for it, you could damage the transmission. You may use ATF +4 in most applications that call for older Dexron and Mercon fluids.
What does ATF 4 mean?
Valvoline ATF+4® is a high-quality automatic transmission fluid specifically engineered to protect and prolong the life of Chrysler automatic transmissions. Additional product benefits include: … Replaces ATF+3® Excellent low and high temperature performance; controls friction and provides smooth shift performance.
What can I use instead of ATF 4?
If you do not plan to use licensed ATF+4 for whatever reason, at the minimum, use a high quality substitute such as Mobil 1 Multi-Vehicle Synthetic ATF or Amsoil ATF.
What is ATF +4 good for?
Mobil ATF+4 is specially formulated to ensure optimal performance in Chrysler automatic transmissions. Its unique additive package provides the proper frictional properties, excellent low-temperature fluidity and dependable wear protection required in applications where a Chrysler MS-9602 type fluid is recommended.
Can you mix dexron and ATF 4?
MaxLife® ATF, ATF +4 and DEXRON® VI are all synthetic transmission fluids. Is it OK to mix synthetic ATF with a conventional and/or synthetic blend ATF? Yes. Synthetic ATF and conventional fluids are 100 percent compatible with each other.
What type of automatic transmission fluid should I use?
Dexron III/Mercon – This is one of the most common fluids on the market. … Most GM and Ford units call for this type of ATF, as well as many imports. If your owners manual recommends any form of Dexron, or any Mercon – other than Mercon V – this is the fluid you want.
Is dexron 3 the same as ATF 4?
Dexron IV was an upgraded version of Dexron III, which was used by GM only briefly. … GM considers Dexron VI to be “backward compatible,” meaning GM recommends it for use in any vehicle that originally used any earlier version of Dexron and that it can be mixed with them.
Is Valvoline ATF 4 the same as Mopar ATF 4?
Here is their answer: We have not had any problems or even questions about this, as the Valvoline ATF+4 is the same exact fluid as the Mopar, simply due to Valvoline being the factory fill for Mopar ATF+4 applications. There is no questions of warranty issues with using the Valvoline products.
How long does ATF +4 last?
If fluid temperatures can be held to 175 degrees F., ATF will last almost indefinitely — say up to 100,000 miles. But if the fluid temperature goes much higher, the life of the fluid begins to plummet.
Can you mix ATF 4 brands?
Like posted above you can mix any atf+4 together.
What is compatible with Mopar ATF 4?
It is fully compatible with all transmissions that require Mopar ATF +®, Mopar ATF+2™ and Mopar ATF+3™. Valvoline ATF + 4 is for use in all applications specifying Mopar ATF+4 or Type MS-9602 fluid.
Is Mercon V the same as ATF 4?
Registered. ATF+4/Mercon V are both synthetic, Dexron III/Mercon IV are non-synthetic and are much cheaper.
Can ATF 4 be used as power steering fluid?
Yes, ATF+4® is the correct fluid to use for your transmission and power steering.