How much does it cost to repair boat engine?

How much is a new boat engine cost?

On average, the cost of a new outboard motor can be as little as $900 to as much as $25,000 or more. With so many factors, take a look at the chart below to get a good idea what each type of motor is going to cost.

Horsepower (HP) Price Range
250 $17,900 to $20,000
300 $20,000 to $23,000
350 $21,000 to $25,000

How many years does a boat engine last?

The average marine gasoline engine runs for 1,500 hours before needing a major overhaul. The average marine diesel engine will run for more than three times that long and log an average 5,000 hours under the same conditions.

How much does a 150 hp outboard cost?

$16,995.00. Brand New 150HP Mercury 4-Stroke EFI outboard motor.

Is 1100 hours on a boat a lot?

A well-maintained diesel boat engine can make it to 3,000 hours if it is used for long, consistent trips. A diesel boat engine used for short jaunts, as most recreational boats in the U.S. are, will average about 1100 to 1500 hours.

Is 400 hours on a boat a lot?

In fact, a boat with normal hours (50-75 per year) will often time run better than a boat with low hours. … 400 hours won’t harm the resale value on a 2010 boat, but if a boat is a 2018 that is a different story.

THIS IS IMPORTANT:  Frequent question: What is needed to start an engine?

Which outboard motor is the most reliable?

Best Outboard Engines

  • Suzuki DF25. Above: Hour upon hour of testing has proven the reliability and easy starting of the DF25. …
  • Yamaha F25. You’ve gotta love where an engine like the Yamaha F25 can take you. …
  • Mercury 75/90/115. …
  • Torqeedo Deep Blue. …
  • Suzuki DF90. …
  • Yamaha V-Max SHO 115. …
  • Evinrude ETEC G2. …
  • Yamaha F250.

How fast will a Mercury 150 go?

With a 150-hp Mercury Four Stroke turning a 15.6×13 pitch Enertia prop, we reached our top speed of 35.1 mph at 6000 rpm. Best cruise came in at 3000 rpm and 14.3 mph.

Why do marine engines run backwards?

the reverse rotation engines used a cam gear drive that was just the crank gear meshing directly with the cam gear with no idler gear in between.. the result was that the cam turned in the reverse direction of the crank.

What is the problem with using your boat’s engine to drive it onto a trailer?

NOTE – While many people drive the boat onto the trailer, it isn’t advised. Using the engine to assist trailering erodes the ramp bed, can lead to debris being sucked into the engine, and can cause an accident! Make sure you drain all water from the boat – the bilge, the live well, the trailer lights, etc.