Frequent question: Is the 6 0 an LS engine?

Is the 6.0 an LS motor?

The 6.0 L is a larger version of the LS motor. 6.0 L blocks were cast of iron, designed to bridge the gap between the new small blocks and big blocks in truck applications. There were two versions of this engine: LQ4, and LQ9, the latter being more performance oriented.

What size engine is a 6.0 LS?

LS Family: Gen. 3, 6.0L, Iron Block, Truck Engines

Engine Block Specifications
Casting Numbers 12551364, 12573581, 12577184
Displacement 6.0L / 364 cid
Bore Dia. 4.000 in.
Stroke 3.622 in.

How many horsepower is a 6.0 LS?

The 6.0-liter LS engine produces 300 horsepower at 4,400 rpm and 360 pound-feet of torque at 4,400 rpm.

Which LS engine is best?

Best LS Engines

  • LS9/LSA: Made for the 2009-2013 Corvette ZR1, the LS9 is a supercharged 6.2L engine rated at 638 horsepower — the most powerful of all small blocks. …
  • LS1: This is the one that started it all! …
  • LS7: Introduced in 2005, the LS7 sported 427 cubic inches, making it the largest small block ever.

How much HP does a 6.0 Vortec have?

GM 6.0L Vortec V-8 Engine Specs

Engine: General Motors 6.0L Vortec V-8 (Vortec 6000)
Emissions Equipment: Catalytic converter, positive crankcase ventilation (PCV)
Max Engine Speed: 6,000 RPM
Peak Horsepower: 360 HP @ 5,400 RPM
Peak Torque: 380 HP @ 4,200 RPM
THIS IS IMPORTANT:  You asked: What is transmission adaptive shifting?

Which is better LS2 or LS3?

But, the most obvious difference between the two is the displacement. The LS2 has 6.0L of displacement, and is technically was the first Gen IV Chevrolet engine. The LS3, on the other hand, has 6.2L of displacement and is also Gen IV Chevrolet engine. … To no one’s surprise, the LS3 heads are better than the LS2 heads.

Is a 6.0 LS A big block?

The current 6.0L is indeed, a small block.

How much boost can a stock 6.0 handle?

Simply put, it can handle plenty of abuse (40 psi of boost and high drive).

How much HP can a 5.3 LS make?

The stock 5.3L is factory rated around 320 hp with 340 lb-ft of torque. When on the dyno at Westech we were able to get close to the stock numbers 315 hp and 325 lb-ft with our 650 Holley carburetor swap, MSD controller, and Edelbrock intake.