How many ohms should a 3 phase motor read?
The reading should be between 0.3 to 2 ohms. If it is 0, there is a short. If it is over 2 ohms or infinite, there is an open. You can also dry the connector and retest to possibly get more accurate results.
How many ohms should a motor read?
With a multimeter, measure the resistance between motor frame (body) and earth. A good motor should read less than 0.5 ohms. Any value greater 0.5 ohms indicate trouble with the motor.
How do you calculate the resistance of a 3 phase motor?
R in ohms = Rated voltage /(rated current x1. 732×3. 5). Example : 2000kw motor, rated voltage is 6600v, rated current is 175A, then R= 6600/(175*1.732*3.5) = 6.22.
How do you check motor winding resistance?
Touch the red (positive) lead of the multimeter to the positive end of the wire windings around the motor. Touch the black (negative) lead of the multimeter to the negative end of the wire windings around the motor. The reading that appears on the multimeter screen is the resistance in ohms.
Should an electric motor have continuity?
The windings (all three in a three-phase motor) should read low but not zero ohms. … It will usually be low enough (under 30 Ω) for the audible continuity indicator to sound. For proper motor operation, all windings must have megohm readings to ground, i.e. to the motor enclosure.